Termékeink

Termékkereső

Kedves Látogatóink!

A manapság tapasztalható komoly Euro - Forint árfolyam ingadozás miatt kérjük Önöket, termékmegrendelés előtt érdeklődjenek munkatársunknál a pontos árképzés érdekében. A webshopunkban lévő termékek árváltozási jogát fenntartjuk.

Megértésüket köszönjük!



ELAC 305 CE
Teljes méretű kép megtekintése


ELAC 305 CE

Egységár (darab): Hívjon az árért vagy válasszon a listából!

Kérdés felvetése a termékről

 

elac 305 ce small 2

elac 300 series finish

Technologies: TT115AS-XR, HT19KST

Specifications
Dimensions H × W × D
208 × 123 × 270 (282) mm
Gross Volume
7.2 l
Weight
5.5 kg
Principle
2-ways, bass reflex
Woofer
Bass Ports
1 × 115 mm AS-XR cone
1 × 45 mm
Tweeter
1 × 19 mm dome
Recom. Amplifier Power
at Nominal Impedance
50-150 W / channel
Crossover Frequency
3,500 Hz
Sensitivity
86 dB / 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
4 Ohm
4 ... 8 Ohm
Minimum Impedance
3.4 Ohm / 300 Hz
Frequency Range
42 ··· 23,000 Hz
Nominal / Peak Power Handling
70 / 90 W
Finishes
black high gloss
titan shadow hg

Brochure download

Treble Unit

elac htkst19

In the design of the fabric dome tweeter HT 19 KST used in the CL 305, special emphasis was put on detailed treble imaging. The membrane diameter of 19mm enables a particularly homogenous and three-dimensional sound resolution.

The fabric material has a special structure with excellent acoustic qualities. The fine mesh allows the pole shank to shimmer through the fabric, thus lending the dome a slight sheen. The upper side of the membrane is coated by hand. Due to a coarser mesh, the metal grille increases the mechanical stability. Furthermore, a phaser has been integrated in the grille. The ferrofluid-cooled high-power voice coil allows the loudspeaker to handle peaks as well as continuous load without damage or influences on the sound.

Computer-aided engineering from ELAC's research field 'room acoustics' has helped to optimise the homogenous dispersion characteristic and even frequency response of the HT 19 KST.

Midbass Unit

TT115AS-XR midbass used in: 305 CE, 310 CE.

elac tt115asxr 1

All woofers of the ELAC 330 CE and the ELAC 310 CE contain the new "Crystal Membrane" (patent pending) and their design is based on the well-known "Aluminium-Sandwich AS Technology" which was developed by ELAC a couple of years ago. The crystal-shaped inverse aluminium dome is joined to the paper cone in a special glueing process resulting the desired sandwich construction.

The stamping of the aluminium foil looks like the surface of a large crystal, this is where the term "Crystal Membrane" come from. This stamping stiffens the aluminium dome considerably which diminishes the membrane-internal resonances resulting in less sound coloration and additionally improves the large signal behaviour noticeably.

The voice coil is not only - like usually - joined to the neck of the paper cone but also to the bottom of the aluminium dome. This design results in the expansion of the transmission range of the respective woofers or midrange drivers by nearly an octave. Therefore the abbreviation "XR" (eXtended Range) has been introduced.

elac tt115asxr 2








Kosár

Az Ön kosara pillanatnyilag üres.

Kedves Látogatóink!

Szeretnénk értesíteni Önöket, a szombati nyitvatartásunk megváltozott!

 
Szombaton az előzetesen bejelentkezett érdeklődők függvényében vagyunk nyitva. Amennyiben Önnek kényelmesebb szombaton ellátogatni üzletünkbe, kérjük jelezze az elérhetőségeink bármelyikén.


Köszönjük!

Elismeréseink:

megbizhato
Itt jár most: Korner-Audio >> Webshop >> Hangfalak,hangszórók >> Polc sugárzók >> ELAC 305 CE

Vissza a tetejére!

2009 - 2012 ©

  Korner - Audio Kft. |  Minden jog fenntartva!